The Atomic Aquatics T3 Titanium Swivel Hose Regulator is also Freeze Protected with a Factory-Sealed First-Stage that also Prevents Contamination such as Silt and Sand entering the mechanism. The Regulator is NITROX ready for Mixtures Up to 40% Out-of-the-Box. The First-Stage has 2 High-Pressure (HP) 7/16" and 5 Low-Pressure (LP) 3/8" Ports. The LP Ports are on a Swivel Turret for Ease of Hose Routing. The T3 Second-Stage is a Balanced Linear Flow Design for Extremely Easy Breathing at all Depths and Dive Conditions. Like the First-Stage the T3 Second-Stage is Built-to-Last with a Titanium Demand Valve Body, Lever and Sealing Orifice. The Diaphragm is made from High Quality Silicone Rubber. This Pneumatically-Balanced Poppet Second-Stage has Atomics Patented Seat Saving Dynamic Orifice which unlike most Second-Stage Orifices is a Floating Valve Design which Reduces Wear on the Second-Stage Poppet Seat when the Regulator is not pressurized adding Life to this Important Seal. The T3 Second-Stage Regulator is equipped with Atomics Patented Automatic Flow Control (AFC). This Unique Diaphragm Activated Vain Automatically Controls the Flow and Venturi-Effect of the Second-Stage for Optimum Breathing Resistance at all Depths. The Second-Stage does have a Soft-Over-Molded Rapid Adjustment Knob for Rare Special Situations. If you have ever experience the Pulling Effect" of the Regulator Second-Stage when you turn your head underwater, those days are gone with Atomics All-Titanium Comfort Swivel with a Black PVD Coating. Perhaps one of the most admired features of Atomic Second Stages is the Patented Comfort Swivel which allows 30° Rotational Movement without Binding or Kinking. The Regulator comes equipped with a 3/8" Threaded 32" (81.3 cm) Low Pressure Hose and a Deluxe Padded Travel Bag The Regulator weighs 1.6 lbs (725.75g) comes with an Owner's Manual and is covered by a Limited Lifetime Warranty.