Sherwood SR2 Scuba Regulator SRB2000




 
Alternative Views:


Our Price$639.95

MPN: SRB2000


: Usually Ships in 24 to 48 Hours
Product Code: SRB2000

Click to view another Regulator Style

Regulator Style:
  

Qty:  
Description Technical Information / Size Chart Whats in the Box?
 
Sherwood SR2 Regulator
Superior breathing performance the SR2 is more technically advanced and more attractive than its predecessor. The SR2's first stage regulator is one of the only truly" balanced first stages on the market today. Most balanced piston regulators come close, but never actually become truly" pneumatically balanced. They attempt to, by creating a very sharp knife" edge piston sealing surface that cuts into the first stage seat. This cutting of the seat deteriorates the seat rapidly lower regulator performance over time.

Sherwood addressed this problem and eliminated it! By making a two-piece first stage piston they were able to increase the seating surface sealing diameter without using a knife edge sealing surface. Not only were they able to eliminate the excessive wear associated with knife edge pistons, they were able to create the first truly" pneumatically balanced flow-thru-piston first stage regulator. This piston design provides high-flow capacity and rapid response to second stage demand as never experienced in the past.

Piston regulators inherently allow water to enter the main spring cavity to properly-adjust themselves to the ambient (surrounding) water pressure. This design also allows contaminates found in water to also enter. Sand, salt, silt and chlorine can rapidly deteriorate first stage performance. Most piston regulators eliminate this problem with packing the main-spring cavity with thick messy grease. The grease transmit's the pressure changes to the mechanism and in theory keeps the mechanism cleaner. The grease has some drawbacks such as it can leak-out" the holes in the first stage body and it also acts as a fly-trap" allowing contaminates to stick to it.

Sherwood also address this problem. By creating a sealed dry spring chamber that prevents water and contaminates from entering the regulator interior, Sherwood was able to keep the intricate internal components free of contamination from ambient deposits of minerals and Increase Performance of the regulator system. The SR2 first stage has 5-low pressure (LP) ports on a 360° swivel and 2-high pressure (HP) ports for optimal hose routing. The first stage regulator is manufactured from marine grade chrome plated brass and is nitrox ready up to 40% out of the box"

The SR2 utilizes a pneumatically balanced second stage. The second stage contains a SMART demand lever and floating crown which reacts to depressurization and relieves the load on the seat, extending seat life while promoting consistent performance. Importantly, the second stage employs a unique single adjustment point to simultaneously set opening effort and high flow performance with one-motion; the need to make separate adjustment therefore has been eliminated.
Sherwood SR2 Regulator
Features
  • Sherwood SR2 Regulator

    • SR2 Regulator Continues-the-Legacy the SR1 Created
    • Packs Advanced Technology into a Compact Case
    • Contemporary-Styling and Utilizing a Multitude of Cutting Edge Materials
    • Superior High-Performance Regulator System
    • Superior Breathing Performance
    • SR2 is More Technically Advanced and More-Attractive than its Predecessor
    • Only Truly" Balanced First Stages on the Market
    • NITROX Compatible to 40% Oxygen Out-of-the-Box"
    • 3/8" Threaded 31" (78.75cm) Low Pressure Hose
    • 2 Year Limited Warranty
    • Free Parts for Life (Restrictions Apply)
    • Owner's Manual
    • First Stage: Sherwood SR2
    • "Truly" Pneumatically-Balanced Design: Unique Two-Piece Flow-Thru-Piston
      Increase Seating Surface Sealing Diameter without using a Knife Edge Sealing Surface
      Provides High-Flow Capacity and Rapid Response to 2'nd Stage Demands
      Gentle Seating Surface for Less Wear and Higher Performance Over-Time
    • Sealed Dry Spring Chamber (SDSC):
      Piston Regulators Inherently "Dirty-Design"
      Sand, Salt and Chlorine Can Rapidly Deteriorate First Stage Performance
      No Thick-Messy-Grease
      SDSC: Prevents Water and Contaminates from Entering Mechanism
      Intricate Internal Components Free of Contamination
      Increase Performance
    • 5-Low Pressure (LP) Ports on a 360° Swivel
    • 2-High Pressure (HP) Ports
    • Optimal Hose Routing
    • Marine-Grade Chrome Plated Brass
    • Second Stage: Sherwood SR2
    • Pneumatically balanced second stage
    • SMART Demand Lever and Floating Crown:
      Reacts to Depressurization and Relieves the Load on Seat
      Extends Seat Life Promotes Consistent Performance
    • Single-Adjustment Point:
      One Touch Performance Adjustment
      Simultaneously Set Opening Effort and High Flow Performance
      One-Motion; No-Need to Make Separate-Adjustment
      Control Knob Optimized to Enable Easy-Location-and-Operation
    • Ergonomic Shape and Size
    • Weightless in Water for Maximum Comfort

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Scuba Gear > Regulators
Sherwood Scuba